Jemco Jewelry Supply - Cutting Pliers

Flush Sidecutters

Description :

We've had hundreds of requests for a reasonably priced flush cutter. This cutter, made in Europe, offers the perfect answer to crafts people who need strength in a precision side cutter. Available in both ultra-flush and semi-slush with a smooth spring return and ergonomic cushion grip handles. Induction hardened jaws are 61 Rockwell hardness.

Stock #	Description	Length	Price Each:
PLR-470.00	Ultra Flush	5"	$20.75 Each

Super Micro Cutter

Description :

Our 4 3/4" Super Micro Cutter is a great value in a flush sidecutter. Made of hardened tool steel and induction hardened jaws, the cutting edge is relieved for a clean cut with a fine point for tight work. With comfort grips and a steel spring, this cutter is perfect for those smaller jobs, and reasonably priced.

Stock #	Description	Length	Price Each:
PLR-471.00	Flush	4 3/4"	$12.95 Each

Power Max Cutters

Description :

Ergonomic Compound cutters that offer the finest in compound leverage construction at an affordable pric. Leverage combined with an induction-hardened, high-grade steel jaw allows for extra close cutting. The handles are shaped to be ergonomically efficient and to prevent fatigue and possible injuries, which can sometimes accompany hours of cutting. Power Max cutters available with a semi-flush or full flush bevel. Overall length is 6 1/2".

Stock #	Description	Length	Price Each:
PLR-470.00	Ultra Flush	5"	$20.75 Each

Flush Cut Prong Cutter

Description :

Excellent shear action cutter especially suited for prong cutting.

End cut configuration.
Shear action for 90 degree cut and long life
Ergonomic handles and return springs.
Made of hardened, high grade tool steel.

Stock #	Length	Price Each:
PLR-463.50	4 5/8"	$14.02 Each

Flush Cut Wire Cutters

Description :

For wire or heavy metal strands where you don't want to ruin your normal cutters.

Shear action means a smooth flush cut on both sides.
Extended life as 90 degrees cutting edges dull less than conventional cutters.
Return springs and ergonomic handles.
Available with thin or standard jaws.

Stock #	Description	Price Each:
PLR-469.10	Standard Jaw 4 5/8"	$15.50 Each

Tapered Flush Cutter

Description :

The tapered head design allows for improved access in tight areas and added precision.
Shear action means a smooth flush cut.
Return springs and ergonomic handles.
Made of tough alloy steel.

Stock #	Description	Price Each:
PLR-469.20	5"	$23.05

Heavy Duty Wire Shear

Description :

Our shear is made specifically to cut gold or silver wire up to 12 gauge and hard wire up to 18 gauge. With maximum leverage and ergonomic design, this cutter uses a 90 degree shear action to assure a flush cut on both sides of the wire. Made of the highest grade tool steel with return springs.

Stock #	Description	Price Each:
PLR-460.00	5 1/2"	$19.70 Each

Hard Wire Shear Action Cutter

Description :

Our hard wire shear is the perfect cutter for hard wire of 0.50mm (24 gauge) or soft wire up to 2mm (12 gauge). Because of its shear type action this cutter will not nick or dull like ordinary cutters. This high leverage cutter enables the user to cut hard "music" wire because the jaws pass at 180 degree angle snapping or shearing the wire cleanly, leaving both ends blunt, which is a bonus . Each end of the wire is cut relatively square, making it easier to rejoin when soldering. Save those expensive flush cutters for needed jobs by using this cutter for the hard stuff. It features black oxide finish, cushion grips, return spring and is economically priced.

Stock #	Description	Price Each:
PLR-461.50	5"	$13.75 Each

Full Flush Nipper

Description :

A cord cutter shaped perfectly to cut close and COMPLETELY FLUSH. Made of tempered steel and, if used properly, will last for years. Our cutter features a return spring and cushion grips. Not intended for anything but cord and the very softest of wire.

Stock #	Size:	1
SHR-170.00	5 1/4"	$5.95